BFVLK - SCOTCHCAST BRAND ELECTRICAL RESIN 251,PT#A
- MSDS: BFVLK
- Manufacturer: 3M CO ELECTRICAL PRODUCTS DIV
- Product Name: SCOTCHCAST BRAND ELECTRICAL RESIN 251,PT#A
- National Stock Number: 5970-00-900-4414
Product Identification
Product ID:SCOTCHCAST BRAND ELECTRICAL RESIN 251,PT#A
MSDS Date:10/24/1989
FSC:5970
NIIN:00-900-4414
MSDS Number: BFVLK
Responsible Party
ST PAUL, MN 55144-1000
US
Emergency Phone: 612-733-1110
Info Phone: 612-733-1110
Cage: 75037
Contractor
Telephone: 512-984-1800
Cage: 75037
Ingredients
DGBA EPOXY RESINS
CAS: 25068-38-6
RTECS: SL6475000
Fraction By Weight: 55-65%
TALC (CONTAINING ASBESTOS)
CAS: 14807-96-6
RTECS: MW2700000
Fraction By Weight: 35-45%
OSHA PEL 0.2 FIBERS/CC
ACGIH TLV: 0.2 FIBERS/CC; 9394
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: <1.0%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3; 9394
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IRRITANT, SENSITIZER
Explanation of Carcinogenicity:DATA PER MGF MSDS.
Effects of Overexposure:EYE: IRRITATION. SKIN: IRRITATION,
SENSITIZATION, ABSORPTION. INHALE: URT IRRITATION. INGEST: GI TRACT
IRRITATION.
Medical Cond Aggravated by Exposure:ANY PRE-EXISTING ALLERGY OR
SENSITIVITY.
First Aid
First Aid:EYE: FLUSH 10-15 MINUTES WITH AMPLE WATER. SKIN: WASH SOAP &
WATER. INHALE: REMOVE TO FRESH AIR, GIVE ART RESPIRATION OR OXYGEN
AS REQUIRED. INGESTION: IF CONSCIOUS, GIVE 1-2 GLASSES WATER. CALL
PHYSI CIAN IMMEDIATELY ALL CASES IF SYMPTOMS PERSIST.
Fire Fighting
Flash Point Method:CC
Flash Point:>300F/149C
Extinguishing Media:USE CARBON DIOXIDE, FOAM, DRY CHEMICAL, OR WATER
FOG.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE. USE WATER
SPRAY TO COOL NEARBY CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:OBSERVE ALL PRECAUTIONS GIVEN. APPLY ABSORBENT
MATERIAL TO SPILL AREA. COLLECT AND PLACE IN CLOSABLE CONTAINER.
Handling
Handling and Storage Precautions:USE ONLY IN WELL-VENTILATED AREAS. USE
LOCAL EXHAUST FOR MIXING, POURING, CURING PROCESSES. VENTILATE HEAT
CURING OVENS AND COOL-DOWN AREAS.
Other Precautions:AVOID EYE,SKIN CONTACT. DO NOT INHALE OR INGEST.
Exposure Controls
Respiratory Protection:USE CCROV RESPIRATOR IF VENTILATION IS
INSUFFICIENT.
Ventilation:LOCAL EXHAUST RECOMMENDED IN ALL WORKING AREAS.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:PROTECTIVE CLOTHINGS.EYE-WASH
FACILITIES,SAFETY SHOWER.
Work Hygienic Practices:AVOID CONTACT WITH EYES AND SKIN;DO NOT BREATHE
VAPORS/MIST/DUST.WASH THOROUGHLY AFTER EACH USE.
Supplemental Safety and Health
PART A OF TWO PART A/B KIT.KEY 1:V5
Chemical Properties
HCC:B2
Spec Gravity:1.53
Viscosity:1750 POISE
Solubility in Water:NEG
Appearance and Odor:BROWN VISCOUS LIQUID
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CARBON OXIDES, TALC DUSTS.
Disposal
Waste Disposal Methods:INCINERATE OR LANDFILL IAW ALL LAWS &
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.